Canon EF 28-135mm f/3.5-5.6 IS USM Standard Zoom Lens for Canon SLR Cameras Standard zoom lens with an Image Stabilizer and high zoom ratio. With the Image Stabilizer turned on, you can obtain sharp, natural-looking pictures in dim lighting without using flash or a tripod. Very handy for places where flash is prohibited. Uses ring-type USM for swift, silent autofocus and full-time manual focus.
A compact and lightweight zoom lens with built-in image stabilizer for greater sharpness Advanced optics and aspherical lens element help preserve sharpness and color clarity from edge to edge Accepts 72mm lens filters (optional)
Features EF mount; standard zoom lens Internal focusing; full-time manual focus; aspherical lens; image stabilizer 28-135mm focal length f/3.5-5.6 maximum aperture Micro UltraSonic Motor (USM)
Fotodiox Dedicated (Bayonet) Lens Hood, for Canon EF 28-135mm f/3.5-5.6 IS Lens as Canon EW-78BII, EW-78 BII, EW-78B IILens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Dedicated lens hoods are designed to match the specific focal length of the lens it was designed for.
Canon EF 28mm f/1.8 USM Wide Angle Lens for Canon SLR CamerasEF 28MM F/1.8 USM Canon
Tamron AF 28-75mm f/2.8 SP XR Di LD Aspherical (IF) for Canon Digital SLR CamerasNow realized thanks to XR technology, Tamron brings you this light and small fast zoom. Unlike typical fast zooms, it weighs only 510g (18oz.), with filter size of 67mm and overall length of 92mm (3.6"). The optical performance is outstanding with the employment of an optical system using two XR elements, three LD elements, and four aspherical elements. In addition, the lens features the “Di” (Digitally Integrated Design) optical system to meet the performance characteristics of digital SLR cameras as well as film cameras.
Precision Design EW-78BII Lens Hood for Canon EF 28-135mm f/3.5-5.6 IS LensThe Precision Design EW-78B II Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.Dedicated lens hoods, such as the Canon EW-78B II, are designed to match the specific focal length of the lens it was designed for. >> Compatible with the following Canon lenses: EF 28-135mm f/3.5-5.6 IS USM Lens.
Canon EF 28-135mm f/3.5-5.6 IS USM Standard Zoom Lens for Canon SLR Cameras - White BoxThe Canon EF 28-135mm f/3.5-5.6 IS Lens is a compact and lightweight standard zoom lens that offers superior optical performance, plus a built-in Image Stabilizer. The IS system reduces the possibility of blurred photographs caused by camera shake, which allows for hand held photography in comparatively dim light without a flash or tripod. At the wide angle end of the zoom range, the equivalent shutter speed gain is approximately 1.5 stops while at the telephoto end, it is approximately 2 stops. Also, the lens has a USM drive mechanism for faster and quieter AF operation, and the pulse control diaphragm (EMD) ensures precise aperture control. Note! White Box products comes supplied in a plain white box, instead of the manufacturer's packaging. It still includes all the manufacturer's accessories.
Canon EW78BII Lens Hood for EF 28-135mm f/3.5-5.6 IS Canon SLR LensHoods offer several benefits to the photographer. Primarily the hood shades the lens from stray light that may result in an unwanted discoloration or hazing of the image, or the appearance of lens flare. Shading your lens helps improve contrast and image quality. A hood is not required to eliminate these problems, as any item used to shade the lens will provide the same protection from stray light. The hood is convenient in that it is built to offer protection while ensuring that it will not inadvertently find its way into your image. Photographers often state the protective abilities of a hood as a reason to have one.
Canon EF 28-300mm f/3.5-5.6L IS USM LensLens Construction (group) 16 Lens Construction (element) 22 No. of Diaphragm Blades 8 Minimum Aperture 22-38 (1/3-stop increments is F22-40) Closest Focusing Distance 0.7m Diagonal Angle Of View 75 degrees - 8 degrees 15' Filter Diameter 77mm Maximum Diameter x Length 92mm x 184mm Weight 3.7lb/1,670g The Zoom Lens EF28-300mm f/3.5-5.6L IS USM replaces the EF35-350mm f/3.5-5.6L USM released in 1993. The new lens offers an extended zoom range at the wide-angle end and incorporates an Image Stabilizer (IS), which compensates for approximately three shutter speeds, allowing the handheld capture of shots that would otherwise be blurred by camera shake. The EF28-300mm f/3.5-5.6L IS USM delivers high-contrast, high-resolution images for which Canon's L-series is renowned. A combination of advanced optical technologies, including UD (ultra-low dispersion) and aspherical lenses, work in concert to achieve a high zoom ratio of approximately 11x while effectively correcting for a variety of aberrations that can occur when zooming. Featuring a new optical design, the lens makes possible a minimum focusing distance of just 0.7 meters throughout the entire zoom range. Other features include a circular diaphragm for improved background blur, and a hardy waterand dust-resistant construction, ensuring professional users unfailing performance under even the most grueling of conditions. And, in consideration of the environment, the model uses only lead-free glass elements.
Opteka EW-78BII Lens Hood for Canon EF 28-135mm f/3.5-5.6 IS SLR LensThe addition of a lens hood can help prevent flares--those circles of light that can accompany images where a strong light source is just outside the fame. These types of lens flares occur when indirect light rays pass through the front lens elements but don't make it all the way through to the image sensor. Opteka's EW-78BII Lens Hood is designed for the Canon EF 28-135mm f/3.5-5.6 IS SLR Lens. Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.
Fotodiox Dedicated (Bayonet) Lens Hood, for Canon EF 28mm f/1.8, 28-105mm f/3.5-4.5 USM, 28-105mm f3.5-4.5 II USM Lenses as Canon EW-63II, EW-63 IILens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Dedicated lens hoods are designed to match the specific focal length of the lens it was designed for.
