NEEWER® Digital Slave Flash + Bracket Set for Digital SLR DSLR Cameras or any Digital Camara! "Fires Without Wires - No Camera Connection Required!" Automatically Synchronizes and Fires with Your Built-In Flash Q&A:
My digital camera has a built-in flash. Why do I need another?
br>Built-in flashes are only effective to 8-10ft or less. This high power flash greatly extends the range!
The built in flash units of digital cameras are on average effective to only about 8-10 feet, and that's when your lens is at its widest-angle setting . When you want to zoom in on the action (towards the telephoto end of your zoom range) you'll find that your built in flash does exactly opposite of what you want, and its range is reduced! So, when you want to use your camera's telephoto capability that you paid for, but also require the built in flash, your pictures come out dark or, even worse!
The advanced slave circuitry of the Pro Digital Auto Slave Flash with Bracket Set is not fooled by the "pre-flash" and eliminates the need for an electrical connection to your camera.
Can I use with a telephoto or wide-angle conversion lens? YES!
Unlike your camera's built in flash; the flash is mounted to the side where even the largest conversion lenses will not block it. You will enjoy more even illumination and at a much greater distance, which is especially needed when working with your telephoto lens.
Does it require special batteries? NO!
This flash uses standard AA size (alkaline or rechargeable NiMH) batteries to power the flash for hundreds of shots.
What cameras will it work with?
Virtually any camera, digital or film!
The Pro Digital Auto Slave Flash with Bracket Set is compatible with virtually any digital or film, point and shoot camera with a built-in flash including: Canon, Casio, Epson, Fuji, GE, HP, Kodak, Kyocera, Konica Minolta, Leica, Nikon, Olympus, Panasonic, Pentax, Polaroid, Ricoh, Samsung, Sony, Pro, Toshiba and Vivitar. can be used to improve the typically poor flash pictures taken by any Camcorder or Cell phone Camera that has a built-in electronic flash!
Zeikos ZE-DS12 Digital Slave Flash with bracket for digital SLR and point and shoot camarasZeikos ZE-DS12 Digital Slave Flash with bracket for digital SLR and point and shoot camaras, no camera connection required, automatically synchronizes and fires with your built-in flash
StudioHut Wireless Radio Slave Flash Remote Trigger (16 channel) complete with 4 Receivers KitThe 16 channel Wireless Radio Slave Flash Trigger is a great way to add versatility to outdoor or indoor photography shooting. 16 channel DIP selection allows the capability to work in a multi-studio environment. Each kit can be used to wirelessly trigger flash lights or strobes. Each receiver is plugged into a single flash or strobe and needs 2 AAA batteries for operation (not included in kit).
The transmitter can be mounted either on a camera's hotshoe or connected to the camera's PC socket with the cord supplied. Using the PC socket connection (if your camera has one) allows simultaneous use of a hotshoe-mounted flash unit and off-camera flashes with this radio trigger set. There is a test button on the top of the transmitter for test firing.
Kit Includes:
Transmitter
4 Receivers with Phone Plug connector
Mini-Phone plug adapter for receiver
Accessory PC to Mini-Phone Plug sync cord
Vivitar Bounce Zoom Slave FlashVIVTAR Digital Slave BOUNCE Flash with ZOOM Head for ALL Digital Cameras (Film Cameras Too!).
This is an Economical, Versatile Electronic Flash that will add lighting when and where you need it. It has an adjustable
Bounce Head and it
ZOOMS from Wide to Normal to Telephoto! It can be used alone (on a camera with a "HotShoe") or in conjunction with your existing flash.
Using the included Bracket the Digital Flash can be mounted adjacent to your camera or, in
Slave Mode, you can place the Flash anywhere you would like more light on your subject.
WORKS IN
SLAVE MODE WITH ANY DIGITAL CAMERA that has a Built-in Flash
Flash is simple to use -just install 4 Common AA Batteries, set to "Normal" mode or "Slave" mode, wait for the ready light, and shoot.
Guide Number is approximately
80 (ISO 100/ft @ 50mm).
Slave Flash: In this mode absolutely NO connection to the camera is required; the flash will fire sympathetically (automatically) when your camera's flash fires.
The Slave Flash can be adjusted to fire normally or after your camera's pre-flash light burst (anti Red-Eye mode). Choose to fire after the 1st, 2nd, 3rd, or 4th flash from your camera.
The
VIVITAR Digital Electronic Slave Flash ships with Camera Bracket and Instructions.
Seagull SYK-5 Wireless Remote Flash Slave Trigger with Red Eye ReductionSeagull SYK-5 Trigger is designed for all Canon, Nikon, Olympus, Pentax, Sigma, Sunpak, Vivitar hot shoe speed flash, with the high sensitive light sensor of this remote slave trigger, the speed flash can be triggered by the master flash easily. It adopts optical theory making the master flasher to control remotely the auxiliary one to flash synchronously without any connection wires.When this slave trigger senses another flash firing in its proximity, it triggers the flash attached to it. Best results when the controlling flash is within 60 feet. This slave trigger gets its working power from the flash attached to it and therefore it is battery-free.It also supports red eye reduction function. While the red eye reduction function is applied, there will be a pre-flashing. It may wrongly trigger the slave flashes. To avoid any misfiring, there is a pre-flashing tuning switch on this trigger (Delay: 70ms-1.5s) for you to find the best triggering delay. -Support camera red-eye reduction flash-With PC socketPackage Content:1x Flash Slave TriggerSuitable for:Hot-shoe flashgunCompatible with Canon TTL flash: 580EXII 580EX 430EXII 430EX 420EX 550EX 380EXNote: This hot shoe is not suitable for Sony and Minolta flash. For Sony / Minolta.
Versatile Bounce & Zoom Powerful Slave Flash for Canon EOS Rebel T2i , T3i , 60D , EOS 5D Mark III and More **Includes Flash Bracket and Mini Tripod**Additional Lighting Made EasyVersatile DesignLightweight and compact design makes this flash the perfect companion for your camera! Three-position flash head can zoom in and out for lighting wide, telephoto and regular shots. Adjusting to several angles allows you to bounce light off of walls and ceilings. The exposure table and speed selector switches ensure appropriate lighting depending on distance. By pressing the red test button, you can check the flash setting. In addition, a green LED indicator lets you know when the flash is ready for use.
Advanced Digital SlaveAuto preflash sensor detects and instantly synchronizes with your camera's built-in flash. Four available modes allows you to easily match your camera's flash system. Compatible with single or multiple flash red-eye reduction systems.
Shooting ConfigurationsShoot directly from your camera's hotshoe in normal mode or connect the flash bracket for additional lighting! When mounted on the flash bracket, flash can be rotated for directional lighting. Perfect for use with cameras that do not have a hotshoe mount.
SpecificationsWorks with ANY camera with a built-in flash or tripod mount. Powered by 4 AA batteries.
Compatible With: Canon EOS 60D / 50D / 40D / 30D / 20D / 10D / 7D / T3 / T3i / T2i / T1i / XS / XSi / XT / XTi / 600D / 1100D / 550D / EOS-1D X / EOS 5D Mark III
Adorama Color Filter Set for the AC Slave & AC Master Slave Flashes, Red, Green, Blue and Yellow.Create special effects and make each photo unique. These filters work great on backgrounds, adding color to still lifes or just an over all color change. Be creative and have fun
NEEWER® Auto Digital Slave Flash For Sony/Canon/Nikon/Pentax/T1i/XS/XTI/ XSi & All Cameras Q&A:
My digital camera has a built-in flash. Why do I need another?
br>Built-in flashes are only effective to 8-10ft or less. This high power flash greatly extends the range!
The built in flash units of digital cameras are on average effective to only about 8-10 feet, and that's when your lens is at its widest-angle setting . When you want to zoom in on the action (towards the telephoto end of your zoom range) you'll find that your built in flash does exactly opposite of what you want, and its range is reduced! So, when you want to use your camera's telephoto capability that you paid for, but also require the built in flash, your pictures come out dark or, even worse!
The new advanced slave circuitry of the Pro Digital Auto Slave Flash with Bracket Set is not fooled by the "pre-flash" and eliminates the need for an electrical connection to your camera.
Can I use with a telephoto or wide-angle conversion lens? YES!
Unlike your camera's built in flash; the flash is mounted to the side where even the largest conversion lenses will not block it. You will enjoy more even illumination and at a much greater distance, which is especially needed when working with your telephoto lens.
Does it require special batteries? NO!
This flash uses standard AA size (alkaline or rechargeable NiMH) batteries to power the flash for hundreds of shots.
What cameras will it work with?
Virtually any camera, digital or film!
The Pro Digital Auto Slave Flash with Bracket Set is compatible with virtually any digital or film, point and shoot camera with a built-in flash including: Canon, Casio, Epson, Fuji, GE, HP, Kodak, Kyocera, Konica Minolta, Leica, Nikon, Olympus, Panasonic, Pentax, Polaroid, Ricoh, Samsung, Sony, Pro, Toshiba and Vivitar. can be used to improve the typically poor flash pictures taken by any Camcorder or Cell phone Camera that has a built-in electronic flash!
Seagull SYK-4 Optical Slave Trigger with PC Sync SocketSeagull SYK-4 optical slave trigger with built-in tripod socket is designed to work with portable flash units that have standard hot shoe mount. It can be triggered either by slave sensor or by using PC connector. It also can be mounted either on hot shoe or standard 1/4"- 20 thread tripod screw. This trigger can also be used as a PC to hot shoe adapter by mounting the trigger on a non-hot shoe camera.
JTL Heavy Duty Clamp with Umbrella Holder for AC Slave FlashesHeavy Duty Clamp with Umbrella Holder for AC Slave Flashes
