Zacuto Z-Find-Pro3 Optical ViewfinderThe Z-Finder Pro 3x is another one of Zacuto's Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available), a 40mm diameter Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens.The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extends the Z-Finder glass further way from the LCD screen for people who are farsighted.The Z-Finder Pro uses Zacuto's Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure.This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it. With the Z-Finder Pro, you are also a step closer to using one of Zacuto's
Flashpoint LCD Foldaway Viewfinder 3X magnificationComes with screen protector that fits Canon 5D and smiliar 3" screens.
Zacuto Z-Finder Pro 2.5XThe
Z-Finder Pro 2.5x is another one of Zacuto's Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (a 3x magnification is available), a 40mm diameter Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens. The diopter allows you to dial in the focus to match your eye perfectly. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extends the Z-Finder glass further way from the LCD screen for people who are farsighted.
The Z-Finder Pro uses the Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a 1/4 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it. With the Z-Finder Pro, you are also a step closer to using one of the Gorilla Support Rigs, as they use the same baseplate as the base.
Digital Shoulder Rig Follow Focus Camcorder Steady DSLR Video Cam Camera RL02FSETThis ePhoto DSLR rig kit delivers excellent results without any jerk problems. It eliminates fatigue. This Shoulder Mount & follow focus can easily be adapted on Canon 5D Mark II, Nikon D90 or any other camera.
Hoodman H-LPP3 HoodLoupe 3.0 Professional 3-Inch Screen Loupe3-inch Magnifing Loupe
Fancierstudio DSLR RIG With Follow Focus And Matte Box By Fancierstudio FL02MHere is the complete system for the DSLR or video camera owner, consisting of: Shoulder Mount, Follow Focus and Matte Box. The aim of this kit is to provide the operator maximum flexibility while shooting both outdoors and indoors. It is a very portable and handy kit.
The Shoulder Mount makes it possible to deliver excellent results without any jerk or motion problems. The shoulder mount also eliminates the fatigue brought about by trying to balance your video camera or DSLR. The configuration of the Shoulder Mount is very quick and easy and requires no tools. This is one of the best kits at this price point available on the market today.
Zacuto Z-DSR StrikerThe Striker is light and easy to handle. It has three points of contact by having one hand on the handgrip, the gunstock in your chest and your focusing hand on the lens. The entire kit is infinitely adjustable. You can add a fourth point of contact by adding one of Zacuto Z-Finders to the kit. The Zacuto Gorilla plate attaches to the bottom of your camera using the standard tripod screw hole.The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Striker rig. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod. The Striker kit can not accommodate a follow focus or matte box as it does not have a baseplate.
Rode VideoMic Directional Video Condenser Microphone w/MountThe RODE VideoMic is a professional grade shotgun microphone. Based on the latest Film industry technology, the VideoMic is designed specifically for use with high quality digital video cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9 V battery and offers a low battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. RODE VideoMic Shotgun Microphone Features Broadcast and studio sound quality Rugged reinforced ABS construction Two step high-pass filter - flat or 80 Hz Intergrated shock mount 9 V battery operation Condenser transducer Low noise circuitry Low handling noise Includes windscreen Integrated camera-shoe mount
Zacuto Z-Finder EVF Pro 3.2 inch High Resolution MonitorThe Zacuto EVF is a 3.2" high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.The Z-Finder EVF Pro is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder which will snap onto the frame of the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames.
Zacuto Z-GRB Gorilla BaseplateThe Gorilla Plate is used in both of the Zacuto Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro. The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20 screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws. The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame